LV-32MX v6 Development System is available now with 20% discount

10. August 2011 by admin.

LV-32MX v6 Development System is available now with 20% discount (expires 9/30/11)

V-32MX v6 by MikroElektronika is a full-featured development system used for developing and testing PIC32 MCU applications. With numerous built-in modules, such as TFT Color Display (320×240) with Touch Screen, Stereo Codec, CAN, Serial Flash, Serial EEPROM, and many others, the LV-32MX v6 development system offers many multimedia features for developing advanced graphic, audio, memory, and storage applications.

• 64 and 100-pin PIC32MX MCUs are supported on removable MCU cards (PIC32MX460F512L included)
• MMC/SD card slot for removable flash storage
• 85 LEDs indicate the logic state on all microcontroller pins
• 85 push buttons to excite microcontroller inputs
• All MCU pins routed to IDC10 connnectors for further expansion
• System can be easily configured by means of DIP switches

Use coupon code TPZM9K6 at http://www.microchipdirect.com/ProductSearch.aspx?keywords=TMIK002

Posted in MikroElektronika, LED, Serial EEPROM, Graphics, CAN, Limited-time Offer, 32-bit, Development Tool | Print | 1 Comment »

16-bit PIC CAN bootloader

29. August 2010 by admin.

ompact solution for fast, efficient and secure reprogramming of 16-bit PIC and dsPIC devices on CAN bus systems.

Overview

The 16bit PIC CAN bootloader is a standalone program that allows download and replacement of any program module within a microcontroller or digital signal controller (e.g. ECUs). It includes a firmware part, to be uploaded in the microprocessor, and a PC software interface (both graphical user interface and command line versions are available). The bootloader firmware is located into the non-volatile memory of the MCU/DSC and allows the device to be reprogrammed by using a CAN bus and a master device that guides the process. The PC software (see screenshot) acts as the master in the process and among other features allows for selecting the CAN hardware to use (Kvaser, IXXAT, Vector Informatik, Peak-System, ESD, Lawicel, IntrepidCS, etc.)

The PC software also allows for selecting the baud rate, the message IDs of the bootloader commands, and the particular CAN bus node on which to run the bootloader operation (specific node bootloading).

The 16bitPIC CAN bootloader package also includes an encrypt/decrypt software solution which allows developers to deliver encrypted HEX files to their final users.

Posted in Bootloader, INGENIA, CAN | Print | 1 Comment »

Special Offer - mE KIT’s for PIC MCUs from mElektronikos

22. April 2009 by admin.

from http://www.melektronikos.com/en/offer/:

 mElektronikos is now offering several kits for our customers. At the moment we have to offer three kind of KIT packages for PIC micocontrolers. Buying a PICKit you get signicifant discount.

Posted in mElektrónIkos, BASIC, Pascal, RS-485, LAN, C Programming, CAN, dsPIC, 32-bit, 16-bit, PIC, 8-bit, Development Tool | Print | 1 Comment »

Check out the open-sourced Very Simple Control Protocol

28. February 2009 by admin.

Check out http://www.vscp.org

VSCP stands for Very Simple Control Protocol and it is, as the name implies, a very simple protocol indeed ( a protocol is much like a language for machines etc on how they should talk with each other). It is simple because it has been developed for use on low end devices such as micro controllers. But actually its more then just a protocol. Its a complete solution for measurement and control. And even though VSCP is very easy to use it is still very capable and can be used in very demanding control situations.

Except for a very well specified message format the protocol supports global unique identifiers for nodes, a register model to give a flexible interface to node configuration and a model for node functionality.

VSCP does not assume anything about the lower level system. It works with Ethernet TCP/IP, Wireless, Zigbee, Bluetooth, CAN, GPRS, RS-232, USB and everything else you want. Its just a uniform way of describing the systems available. Every control situation can be described and implemented using VSCP.

A normal user does not see or know much of VSCP anyway. Its just the underlying control system that makes things possible. Much the same way as someone driving a car does not need to know a lot about motors.

Some features:

• Free and open for commercial and other use.

• Have two levels. Level I and Level II where level I is designed with CAN as the least common denominator. Can be used for TCP/IP, UDP, RF, Mains, etc etc.

• Has globally unique id’s for each node.

• Has a mechanism to automatically assign a unique id to a newly installed node.

• Can use “decision matrixes” and “registers” as a uniform way to configure nodes.

• Has software and drivers for Windows and Linux. More added all the time.

• Has a common specification language “MDF” that describe a module in a uniform way that can be used by set up software and such.

and more…

Posted in Bluetooth, RS-232, Protocol, RF, Wireless, Open Source, USB, CAN, TCP/IP, Ethernet, ZigBee | Print | 1 Comment »

MUST SEE!!!! Special Offer on a BUNCH of mElektronikos PIC Kits

19. February 2009 by admin.

Special Offer - mE KIT’s

  

mElektronikos is now offering several kits for our customers. At the moment we have to offer three kind of KIT packages for PIC micocontrolers. Buying a PICKit you get signicifant discount.

 

  EasyStart PICKits

EasyStart Kit 1 - EasyPIC4 + mikroBasicOffers good start for beginner users and get significant discount!!! Easy-to-learn BASIC syntax, advanced compiler features, built-in routines, and many practical examples we have provided allow a quick start in programming PIC. EasyPIC4 development system is a full-featured development board for the Microchip PIC microcontrollers. It was designed to allow students or engineers to easily exercise and explore the capabilities of the PIC microcontrollers. [more]  

EasyStart Kit 2 - EasyPIC4 + mikroPascal
Offers good start for experienced users and get significant discount !!! Develop your applications in intuitive and friendly Pascal environment, using many advanced features and practical examples. EasyPIC4 development system is a full-featured development board for the Microchip PIC microcontrollers. It was designed to allow students or engineers to easily exercise and explore the capabilities of the PIC microcontrollers. [more] 

 

 

EasyStart Kit 3 - EasyPIC4 + mikroC 
Offers good start for expert users and get siginficant discount !!! All the power and flexibility provided by ANSI C, accompanied with the most advanced IDE on the market. Plenty of practical examples and a comprehensive documentation allow a quick start in programming PIC. EasyPIC4 development system is a full-featured development board for the Microchip PIC microcontrollers. It was designed to allow students or engineers to easily exercise and explore the capabilities of the PIC microcontrollers. [more] 

 

 

 mikroExperts PICKits

 

 

 

mikroExpert Kit 1 - BIGPIC4 + mikroPascal
Offers good start for pascal users who wants to explore 64 and 80-pin PIC. Develop your applications in intuitive and friendly Pascal environment, using many advanced features and practical examples. BIGPIC4 development system supports the latest 80-pin PIC microcontrollers (it is delivered with PIC18F8520 working at 10MHz). Many ready made examples guarantee successful use of the system. [more]   

mikroExpert Kit 2 - BIGPIC4 + mikroC
Offers good start for c users who wants to explore 64 and 80-pin PIC. All the power and flexibility provided by ANSI C, accompanied with the most advanced IDE on the market. Plenty of practical examples and a comprehensive documentation allow a quick start in programming PIC. BIGPIC4 development system supports the latest 80-pin PIC microcontrollers (it is delivered with PIC18F8520 working at 10MHz). Many ready made examples guarantee successful use of the system. [more] 

 

 

 

 mikroNetworking PICKits

 

 

CAN communication Kit (PIC) - 2 x EasyPIC4 + 2 x CANSPI board + mikroC + Twisted Wire + Extra Examples
Offers good start for users who wants to explore CAN PICs networks at discount price and get CANSPI boards and twisted wire (for connecting). Package also contains extra examples that can’t be found online, and only users who bought this package get extra examples. Connect two EasyPIC4 development tools and load up examples and you are ready for designing your CAN network. [more]  

RS485 communication Kit (PIC) - 2 x EasyPIC4 + 2 x RS-485 board + mikroC + Twisted Wire + Extra Examples
Offers good start for users who wants to explore RS485 PICs networks at discount price and get RS485 boards and twisted wire (for connecting). Package also contains extra examples that can’t be found online, and only users who bought this package get extra examples. Connect two EasyPIC4 development tools and load up examples and you are ready for designing your CAN network. [more] 

 

 

Serial Ethernet Training Kit (PIC) - 2 x EasyPIC4 + 2 x Serial Ethernet board + mikroC + Extra Examples
Offers good start for users who wants to explore PIC ethernet communication at discount price and get two Serial Ethernet boards. Package also contains extra examples that can’t be found online, and only users who bought this package get extra examples. Connect two EasyPIC4 development tools and load up examples and you are ready for designing your PIC LAN network. [more] 

 

 

 

 mikroAcquisition PICKits

 

 

 

Compact Flash Acquisition Kit 1 (PIC) - BIGPIC4 + Accel. Board + 12-bit ADC + mikroC + Extra Examples
Offers good start for users who wants to explore Data Acquisition and Data Logging at discount price and get Acceleration Board and 12-bit ADC. Package also contains extra examples that can’t be found online, and only users who bought this package get extra examples. Connect BIGPIC4 with extra boards and load up examples and you are ready for designing your device for automatic collection of data from sensors, instruments and devices: in a factory, laboratory or in the field. [more]   

Compact Flash Acquisition Kit 2 (PIC) - BIGPIC4 + Accel. Board + 12-bit ADC + mikroPascal + Extra Examples
Offers good start for users who wants to explore Data Acquisition and Data Logging at discount price and get Acceleration Board and 12-bit ADC. Package also contains extra examples that can’t be found online, and only users who bought this package get extra examples. Connect BIGPIC4 with extra boards and load up examples and you are ready for designing your device for automatic collection of data from sensors, instruments and devices: in a factory, laboratory or in the field. [more] 

 

 

Compact Flash Acquisition Kit 3 (PIC) - EasyPIC4 + Accel. Board + RTC + Compact Flash Board + mikroC + Extra Examples
Offers good start for users who wants to explore Data Acquisition and Data Logging at discount price and get Acceleration Board, Real Time Clock and CF board. Package also contains extra examples that can’t be found online, and only users who bought this package get extra examples. Connect EasyPIC4 with extra boards and load up examples and you are ready for designing your device for automatic collection of data from sensors, instruments and devices: in a factory, laboratory or in the field. [more] 

 

 

Compact Flash Acquisition Kit 4 (PIC) - EasyPIC4 + Accel. Board + RTC + Compact Flash Board + mikroPascal + Extra Examples
Offers good start for users who wants to explore Data Acquisition and Data Logging at discount price and get Acceleration Board, Real Time Clock and CF board. Package also contains extra examples that can’t be found online, and only users who bought this package get extra examples. Connect EasyPIC4 with extra boards and load up examples and you are ready for designing your device for automatic collection of data from sensors, instruments and devices: in a factory, laboratory or in the field. [more] 

 

 

 

mElektronikos is now offering several kits for our customers. At the moment we have to offer three kind of KIT packages for dsPIC micocontrolers. Buying a dsPICKit you get signicifant discount.

 

 EasyStart dsPICKits

 EasyStart Kit 1 for dsPIC - EasydsPIC4 + mikroBasic for dsPIC
Offers good start for beginner users and get significant discount!!! Easy-to-learn BASIC syntax, advanced compiler features, built-in routines, and many practical examples we have provided allow a quick start in programming dsPIC. EasydsPIC4 development system is a full-featured development board for the Microchip dsPIC microcontrollers. It was designed to allow students or engineers to easily exercise and explore the capabilities of the dsPIC microcontrollers. [more]   

EasyStart Kit 2 for dsPIC- EasydsPIC4 + mikroPascal for dsPIC
Offers good start for experienced users and get significant discount !!! Develop your applications in intuitive and friendly Pascal environment, using many advanced features and practical examples. EasydsPIC4 development system is a full-featured development board for the Microchip dsPIC microcontrollers. It was designed to allow students or engineers to easily exercise and explore the capabilities of the dsPIC microcontrollers. [more] 

 

 

EasyStart Kit 3 for dsPIC - EasydsPIC4 + mikroC for dsPIC
Offers good start for expert users and get siginficant discount !!! All the power and flexibility provided by ANSI C, accompanied with the most advanced IDE on the market. Plenty of practical examples and a comprehensive documentation allow a quick start in programming dsPIC. EasydsPIC4 development system is a full-featured development board for the Microchip dsPIC microcontrollers. It was designed to allow students or engineers to easily exercise and explore the capabilities of the dsPIC microcontrollers. [more] 

 

 

 

 

 mikroExperts dsPICKits

 

 

mikroExpert Kit 1 for dsPIC - dsPIC PRO 3 + mikroPascal for dsPIC
Offers good start for pascal users who wants to explore 64 and 80-pin dsPIC. Develop your applications in intuitive and friendly Pascal environment, using many advanced features and practical examples. dsPIC PRO 3 development system supports 64 and 80 dsPIC30F microcontrollers (it is delivered with dsPIC30F6014A working at 10MHz). Many ready made examples guarantee successful use of the system. [more]   

mikroExpert Kit 2 for dsPIC - dsPIC PRO 3 + mikroC for dsPIC
Offers good start for c users who wants to explore 64 and 80-pin dsPIC. All the power and flexibility provided by ANSI C, accompanied with the most advanced IDE on the market. Plenty of practical examples and a comprehensive documentation allow a quick start in programming dsPIC. dsPIC PRO 3 development system supports 64 and 80 dsPIC30F microcontrollers (it is delivered with dsPIC30F6014A working at 10MHz). Many ready made examples guarantee successful use of the system. [more] 

 

 

 

 

 

mElektronikos is now offering several kits for our customers. At the moment we have to offer three kind of KIT packages for dsPIC33/PIC24 micocontrolers. Buying a dsPIC33/PIC24 Kit you get signicifant discount.

 

 EasyStart dsPIC33/PIC24Kits

 

EasyStart Kit 1 for dsPIC33/PIC24 - LV 24-33 + mikroBasic for dsPIC and PIC24
Offers good start for beginner users and get significant discount!!! Easy-to-learn BASIC syntax, advanced compiler features, built-in routines, and many practical examples we have provided allow a quick start in programming dsPIC. System supports 64, 80 and 100 pin PIC24F/24H/dsPIC33F microcontrollers (it comes with PIC24FJ96GA008 - PIC24 16-bit Microcontroller, 96 KB Flash Memory, 8 KB RAM and Advanced Peripherals, 80 Pin Package). [more]     

EasyStart Kit 2 for dsPIC33/PIC24 - LV 24-33 + mikroPascal for dsPIC and PIC24
Offers good start for experienced users and get significant discount !!! Develop your applications in intuitive and friendly Pascal environment, using many advanced features and practical examples. System supports 64, 80 and 100 pin PIC24F/24H/dsPIC33F microcontrollers (it comes with PIC24FJ96GA008 - PIC24 16-bit Microcontroller, 96 KB Flash Memory, 8 KB RAM and Advanced Peripherals, 80 Pin Package). [more] 

 

 

 

EasyStart Kit 3 for dsPIC33/PIC24 - LV 24-33 + mikroC for dsPIC and PIC24
Offers good start for expert users and get siginficant discount !!! All the power and flexibility provided by ANSI C, accompanied with the most advanced IDE on the market. Plenty of practical examples and a comprehensive documentation allow a quick start in programming dsPIC. System supports 64, 80 and 100 pin PIC24F/24H/dsPIC33F microcontrollers (it comes with PIC24FJ96GA008 - PIC24 16-bit Microcontroller, 96 KB Flash Memory, 8 KB RAM and Advanced Peripherals, 80 Pin Package). [more]

 

Posted in Pascal, mElektrónIkos, IDE, RS-485, LAN, Data Logging, Data Acquisition, Ethernet, BASIC, PIC, 16-bit, dsPIC, 8-bit, CAN, Programmer, C Programming, Development Tool | Print | 1 Comment »

CANPIC CAN232 Special Pricing using PayPal. Only $75

28. December 2008 by admin.

CANPIC CAN232 : Normal Price $89 

Special Pricing using PayPal. Only $75

Now available from Emicros is a low-cost version of the CAN232 Adapter. Based on the PIC18F248 micro from MicroChip, this flash based PIC processor contains an embedded CAN module and more memory allow use to provide the next level of functionality at a lower cost.

Go to http://www.canpic.com/ 

Posted in PayPal, Emicros, CAN, 8-bit, Limited-time Offer | Print | 1 Comment »